1. Introduction

Updated 05/26/2023

This document is intended to give details and guidance to a boat builder or equipment installer on the proper procedure for the installation of the Seakeeper Ride system.

Because of the quantity of parts and careful installation requirements, set aside a clean, well-ventilated workspace, take inventory of necessary tools and parts, and review the entirety of this manual before setting to work. To gain a broad understanding of the installation process, read the Installation Overview.

The instructions in this manual should be repeated for both the port and starboard Controllers.

Note: Scan the QR code below to access Seakeeper Ride BILT 3D instructions.

WARNING: You must read and follow all instructions before installing and using the Seakeeper Ride system.

Figure 1 – Seakeeper Ride Installed