4. Inventory Parts

Please review all parts included before proceeding. The following figure and table describe all parts included in the assembly. Review parts and ensure all parts are present before starting the installation procedure.

1. Blade
2. Seal Plate
3. Actuator
4. Actuator Plate
5. 3 Degree Wedge Plate
6. 4 Degree Wedge Plate
7. 5 Degree Wedge Plate
8. Transom Plate

9. Cable Gland Tube
10. Cable Gland Nut
11. Outer Cable Guide
12. Inner Cable Guide
13. Cable Support Guide
14. Drill Guide Tube
15. Drill Guide Follower

Table 1 – Mechanical Installation Hardware

Wedge Pack Hardware				Positioning Screws
M8-1.0 x 30 mm Button Head Bolt	M8-1.0 x 50 mm Button Head Bolt	M8-1.0 x 60 mm Button Head Bolt	M8 Half Cylinder Washer M8 Cylindrical Nut	Phillips No. 8 x 1.5 in. Screw
Seal Plate Hardware			Blade Hardware
M6-1.0 x 30 mm Socket Head Cap Screw	M6 Washer	M6-1.0 x 16 mm Flat Head Socket Cap Screw	M8-1.25 x 20 mm Hex Head Screw	M8 Washer
Cable Routing Hardware
Phillips No. 8 x 0.75 in. Screw	Phillips No. 8 x 1.5 in. Screw

*Item count given for 450 mm and 525 mm systems. 600 mm systems will have two (2) additional pieces for this hardware type.