1. The Seakeeper must only be lifted from the supplied lifting eyes (see Section: Transport and Unpacking).
  2. The Seakeeper flywheel is supported by precision bearings. While unpacking and lifting the Seakeeper assembly, DO NOT drop or impart mechanical shock as damage to bearings could result.
  3. While handling / installing the Seakeeper assembly, protect exposed hydraulic brake cylinder rods (see Figures 1) from scratches or damage as this could lead to premature seal failure and oil leaks.
  4. Exercise care to protect any exposed surfaces as damage to finish could lead to early appearance degradation of the Seakeeper.
Figure 1 – Seakeeper 1 Components – Isometric (left) / Top-Down (right)