Seakeeper 1 Installation Manual (90519-1)
Electrical Equipment Ground Connections
- 90511 – Seakeeper 1 Cable Block Diagram
Seakeeper 1 to Vessel Ground Connection Instructions
- Connect Cable 6, 4 AWG, PE cable to vessel grounding bus to comply with:
- EM/IEC 60204-1 Clauses 6.3.3 and 8.2.3.
- ABYC E-11 July 2018 Clauses 11.5.2 and 11.16.1.
- Butt splice Cable 6, 4 AWG (green) to a 4 AWG ground wire (customer-supplied) suitable in length for the specific installation, as shown in the following figure.
- Note: CABLE 6 (GREEN) SHOULD ONLY BE USED FOR GROUNDING THE SEAKEEPER TO THE VESSEL GROUND.