Seakeeper 1 Installation Manual (90519-1)
Seakeeper 1 DC Seawater Pump P/N 30331 (Optional)
- Seakeeper offers a self-priming DC Seawater pump as an optional addition. DC Seawater Pump, Seakeeper 1 Assembly (P/N 30331), is shown in the following figure.
- The Seakeeper Seawater Pump is a 24 VDC pump operated at 12 VDC for the Seakeeper 1 and maintains a seawater flow of approximately 2.5 GPM (9.5 LPM) at 12 VDC.
- The pump assembly is pre-wired for connection to Seakeeper 1 Cable 5 and includes a seawater strainer and various fittings.
The pump specifications are as follows:
|Volts||24 VDC (operate at 12 V for Seakeeper 1)|
|Rated Flow||2.5 GPM (9.5 LPM), at 12 VDC|
|Overcurrent Protection Rating||15 A|
|Ignition Protection||ISO 8846 or equiv.|