Seakeeper 5 / 6 Installation Manual (90402-5) 6/5-233-5847 to Current
5.2 Required Supplies for Seakeeper Installation
Table 1 outlines the customer-supplied components required for the Seakeeper 6 / 5 installation:
| Item | Description | QTY | Installation Manual Reference Section | Other Reference | System |
| 1 | Spreader bar for lifting the Seakeeper | 1 | Transport & Unpacking | P/N 80067 | Mechanical |
| 2 | Seakeeper 6 Fixture Kit | 1 | Bolt-In Installation | P/N 90392 | Mechanical |
| 3 | Threaded insert M16-2 (24 mm) | 16 | Bolt-In Installation | Dwg 90398 | Mechanical |
| 4 | Seakeeper 6/5 Bolt-In Kit | 1 | Bolt-In Installation | P/N 90400 | Mechanical |
| 5 | Seakeeper 6/5 Thru-Bolt Kit | 1 | Bolt-In Installation | P/N 90660 | Mechanical |
| 6 | Marine Sealant | AR | Bolt-In Installation | Dwg 90398 | Mechanical |
| 7 | Nickel-based Anti-seize | AR | Bolt-In Installation | Dwg 90398 | Mechanical |
| 8 | Circuit Breaker 30 A, 110 VAC or Circuit Breaker 20 A, 230 VAC | 1 | Electrical Equipment Power Connections | Dwg 90396 | Electrical |
| 9 | Circuit Breaker, 12 VDC, 15 A | 2 | Electrical Equipment Power Connections | Dwg 90396 | Electrical |
| 10 | Battery Isolator Switch | 1 | Electrical Equipment Power Connections | Dwg 90396 | Electrical |
| 11 | M6 terminal lug for grounding Seakeeper | 1 | Electrical Equipment Ground Connections | Dwg 90396 | Electrical |
| 12 | Cable, 10 AWG, for grounding Seakeeper at rear brace to vessel ground | 1 | Electrical Equipment Ground Connections | Dwg 90396 ABYC E-11 | Electrical |
| 13 | Seawater pump, 12VDC, 15 A max Optional: DC Seawater Pump Assembly (pre-wired) | 1 | Electrical Equipment Power Connections | Dwg 90396 P/N 30331 | Electrical / Cooling |
| 14 | Compatible MFD or Optional Seakeeper 5″ Touch Display | 1 | Electrical Equipment Power Connections | Dwg 90396 TB-90640 / P/N 90600 | Electrical |
| 15 | Through-hull fittings (1 high-speed pick-up / 1 overboard discharge) | 2 | Connecting Seawater to Heat Exchanger | Dwg 90397 | Cooling |
| 16 | Seawater Strainer *included with Seakeeper Seawater Pump (P/N 30331) | 1 | Connecting Seawater to Heat Exchanger | Dwg 90397 | Cooling |
| 17 | Seacock Valve | 1 | Connecting Seawater to Heat Exchanger | Dwg 90397 | Cooling |
| 18 | 3/4 in. (19 mm) ID Seawater Suction Hose AND Discharge Hose | AR | Connecting Seawater to Heat Exchanger | Dwg 90397 | Cooling |
| 19 | Hose clamps for seawater plumbing to ¾ in. (19 mm) hose barb (2 per hose barb) | 4 | Connecting Seawater to Heat Exchanger | Dwg 90397 | Cooling |
AR = As Required
Dwg = Drawing