Seakeeper 5 / 6 Installation Manual (90402-5) 6/5-233-5847 to Current
5.3 Tools Required for Installation
Item | Description | Use |
1 | Wire Cutter | DC and AC power cables |
2 | Wire Stripper | DC and AC power cables |
3 | 10 and 13 mm Socket Wrench | Side Panels and ground stud |
4 | Slot Screwdriver, 5/64 in. | Field assembly connectors |
5 | 1/4 in. Nut Driver | Hose clamps |
6 | Greenlee K05-Synchro Crimp Tool, or equivalent | Ground cable |
7 | Utility Knife | Scoring cable jackets |
8 | Hoist, Forklift, or Crane | Unpacking and Lifting Seakeeper 4.5 into position |
9 | Drill/Drill Press | Bolt hole penetrations |
10 | 1/2 in. Drive Torque Wrench | Foundation bolt torqueing |
11 | 19 mm Socket Wrench | Foundation bolts |
12 | Heat Gun | For conductor heat shrink |
13 | Hole Saw | Through-hull seawater fittings |