Seakeeper 26 Installation Manual (90265-8); S/N 26-233-0690 to Current
5.3 Tools Required for Installation
List of Common Tools That May Be Required for Installation
Item | Description | Use |
---|---|---|
1 | Hoist, Forklift, or Crane | Unpacking and lifting the Seakeeper |
2 | Transfer punch kit | Locating foundation holes |
3 | Drill / Drill Press | Bolt holes |
4 | ½ in. drive Torque wrench | Foundation bolts |
5 | ½ in. drive extensions | Foundation bolts |
6 | 24 mm Socket | Foundation bolts |
7 | Wire cutter | DC Power, AC Power cables |
8 | Wire stripper | DC Power, AC Power cables |
9 | Phillips head screwdriver | Cover Panels |
10 | 13 mm Socket Wrench | Cover Panels |
11 | 3 mm hex key | Gimbal sensor mount plate |
12 | 2.5 mm hex key | Gimbal angle sensor |
13 | ¼ in. nutdriver | Hose clamps |
14 | Terminal or quick disconnect crimper | Power cables |
15 | Utility knife | Scoring cable jackets |
16 | 10 mm Socket Wrench | Ground Stud |