Seakeeper 16/18/12HD Installation Manual (90549-2)
Required Supplies Needed for Seakeeper Installation
Required Supplies Needed for Seakeeper Installation
(Not Supplied With the Seakeeper)
Item | Description | Qty | Installation Manual Reference Section | Other Reference | System |
---|---|---|---|---|---|
1 | Adhesive and cleaning supplies for bonding to hull | Mechanical Installation | Mechanical | ||
2 | Soundproofing Considerations | Selection of Installation Location | Mechanical | ||
3 | Spreader bar for lifting Seakeeper | Transport and Unpacking | Mechanical | ||
4 | Hose clamps for seawater plumbing to ¾ in. (19 mm) hose barb (2 per hose barb) | 4 | Connecting Seawater to Heat Exchanger | Cooling | |
5 | Circuit Breaker, AC, 2-Pole, 30 A | 1 | Electrical Equipment Power Connections | Dwg 90539 | Electrical |
6 | Circuit Breaker, DC, 1-Pole, 10 A | 1 | Electrical Equipment Power Connections | Dwg 90539 | Electrical |
7 | M6 terminal lug for grounding Seakeeper at rear brace | 1 | Electrical Equipment Ground Connections | Electrical | |
8 | Cable, 10 AWG, for grounding Seakeeper at rear brace to vessel ground (used with item 5) | AR | Electrical Equipment Ground Connections | Dwg 90539 | Electrical |
9 | Seawater pump, 24 VDC (Optional Seakeeper Supplied) | 1 | Electrical Equipment Power Connections | Dwg 30322 | Electrical |
10 | Circuit Breaker, DC, 1 Pole, Current rated at pump | 1 | Electrical Equipment Power Connections | Dwg 90539 | Electrical |
AR = As Required
Dwg = Drawing
List of Common Tools That May Be Required for Installation
Item | Description | Use |
---|---|---|
1 | Wire Cutter | DC Power, AC Power cables |
2 | Wire Stripper | DC Power, AC Power cables |
3 | Phillips Head screwdriver, #2 | Cover Panels |
4 | 13 mm socket wrench | Cover Panels |
5 | 3 mm hex key | Gimbal angle sensor mount plate |
6 | 2.5 mm hex key | Gimbal angle sensor |
7 | 1/4 in. Nut Driver | Hose clamps |
8 | Terminal or quick disconnect crimper | Power cables |
9 | Utility knife | Scoring cable jackets |
10 | 10 mm socket wrench | Ground stud |
11 | Crimping tool | DC Power, AC Power cables |