Removal and Disposal

Removal

This section details basic instructions for removal of a Seakeeper from a boat. The overall basic instructions are to reverse the installation instructions:

1. Disconnect seawater pump from heat exchanger and power connector on wiring harness.
2. Drain heat exchanger of all seawater.
3. Disconnect Seakeeper input power cables.
4. Remove all installation fasteners.
5. Remove the Seakeeper unit using a spreader bar.

Disposal

DO NOT disassemble the Seakeeper to a greater degree than necessary for removal from the boat. DO NOT dispose of a Seakeeper unit in a landfill. The unit must be shipped back to Seakeeper.