Electrical Equipment Mounting

Precautions: Each item of electrical equipment has specific mounting instructions. These instructions
should be followed to ensure proper function of the Seakeeper.

Do NOT move Seakeeper mounted components from their
locations or incorrect Seakeeper operation will result.

1. Touch Display Mounting Instructions, Surface Mount
   1. Console space required: Approx. 5.24 W x 3.70 H in. (133 x 94 mm)
   2. Mounting Instructions, Surface Mount: See Drawing No. 90438 – 5″ Operator Display Envelope and Mounting Details, for details. Seakeeper Touch Display 3D Model available upon request.
2. CAN Communications Tee Adapter and Terminator Mounting Instructions
   1. Console space required, Rear: Approx. 4 W x 3 H in. (102 x 76 mm)
   2. Mounting Instructions: Rear mount on vessel console panel, within 2 ft (0.6 m) of Display.
   3. Hardware required: One mounting screw for .197 in. (5 mm) diameter mounting hole on Tee Adapter.
3. USB Extension Cable Assembly Mounting Instructions
   1. Console space required: Approx. 2 W x 2 H in. (51 x 51 mm), within 6 ft (2 m) from Touch Display.
   2. Mounting Instructions, Surface Mount: Use panel cutout as shown in Section: Display Installation Template. Maximum panel thickness 1/8 in. (3.2 mm).
   3. Install sealed USB connector end of the extender cable assembly in panel from rear and secure with hex jam nut (provided) on front.
   4. Connect M12 connector end of the extender cable assembly to the rear of the Touch Display on receptacle AUX.
4. Multi-Function Display Integration Instructions
   1. The following Technical Bulletins outline the instructions for MFD Integration:
      1. TB 90478 – Garmin and Seakeeper Compatibility
      2. TB 90479 – Raymarine and Seakeeper Compatibility
      3. TB 90480 – Simrad and Seakeeper Compatibility
      4. Additional MFD Compatibility will be added as new integrations become available. Please contact Seakeeper for additional information.
   2. Seakeeper MFD Compatibility cable part numbers can be found in the relevant technical bulletin for the specific MFD, listed above.