5. Inventory Parts

Please ensure all parts are present in the package before proceeding. If any parts are missing, contact the seller.

1. Software Module

2. Distribution Module

3. Keypad (Optional, Purchased Separately)

Table 1 – Electrical Mounting and Wiring Components

Software Module Mounting Hardware	Distribution Module Mounting Hardware
Phillips No. 10 x 1 in. Screw	Distribution Module Mounting Bracket	Phillips No. 12 x 0.75 in. Screw	M4 x 10 mm Flat Head Socket Cap Screw
Distribution Module Wiring Components
Ampseal Housing Backshell	Ampseal Housing	Ampseal Cavity Sealing Plug	90 Degree Crimp Connect
Distribution Module Wiring Components Cont.
Controller Cable Heat Shrink 0.75 x 1.5 in.	Grounding Wire Heat Shrink 0.375 x 1 in.	M6 Grounding Split Lock Washer	M6-1.0 x 12 mm Hex Head Grounding Screw
Seakeeper Ride Proprietary CAN Bus Components
Double Ended NMEA 2000 Cable *Lengths 0.6, 1, 6, 10 m (2.0, 3.3, 19.7, 32.8 ft)	Distribution Module Power Cable	Ethernet Adapter Cable (Purchased Separately)	CAN Bus Tee
Seakeeper Ride Proprietary CAN Bus Components Cont.
Powered CAN Bus Tee	Phillips No. 6 x 1.25 in. Screw	Male CAN Bus Terminator	Female CAN Bus Terminator
Keypad Components (Optional)
M8 Threaded Stud	Keypad Mounting Bracket	M8 Wingnut	Double Ended NMEA 2000 Cable 3 m (9.8 ft)