3.5 Multifunction Display (MFD) Connection

Reference Documents & Drawings

• 90396 – Seakeeper 6 Cable Block Diagram
• TB 90478 – Garmin and Seakeeper Compatibility
• TB 90479 – Raymarine and Seakeeper Compatibility
• TB 90480 – Simrad and Seakeeper Compatibility
• TB-90598 – Furuno and Seakeeper Compatibility

1. The Seakeeper can be connected to a variety of available MFD systems. Refer to the Technical Bulletins Section of the Seakeeper Technical Library for manufacturer specific MFD compatibility technical bulletins.
   1. MFD specific Technical Bulletins will be updated regularly as new MFD systems become compatible. Currently GARMIN, RAYMARINE, SIMRAD, and FURUNO offer compatible MFD models.
   2. Once a compatible MFD has been selected, refer to the appropriate manufacturer specific Technical Bulletin for integration instructions.
2. Connect D-Code 10 m cable, P/N 30330, to MFD manufacturer-specific Ethernet adapter cable. Custom Ethernet cables for specific MFD manufacturers are available through Seakeeper and must be purchased if connecting to an MFD. Connect the D-Code cable according to Figure 10. The ethernet port on the back of the display is shown in Figure 11.