Seakeeper 4 / 4.5 Installation Manual (90762-1)
5.3 Tools Required for Installation
TABLE 2
Item | Description | Use |
1 | Wire Cutter | DC and AC power cables |
2 | Wire Stripper | DC and AC power cables |
3 | 10 and 13 mm Socket Wrench | Cover Panels and ground stud |
4 | Slot Screwdriver, 5/64 in. | Field assembly connectors |
5 | 1/4 in. Nut Driver | Hose clamps |
6 | Greenlee K05-Synchro Crimp Tool, or equivalent | Ground cable |
7 | Utility Knife | Scoring cable jackets |
8 | Hoist, Forklift, or Crane | Unpacking and Lifting Seakeeper 4.5 into position |
9 | Drill/Drill Press | Bolt hole penetrations |
10 | 1/2 in. Drive Torque Wrench | Foundation bolt torqueing |
11 | 22 mm Socket Wrench | Foundation bolts |
12 | Heat Gun | For conductor heat shrink |
13 | Hole Saw | Through-hull seawater fittings |