Seakeeper 4 / 4.5 Installation Manual (90762-1)
5.3 Tools Required for Installation
TABLE 2
| Item | Description | Use |
| 1 | Wire Cutter | DC and AC power cables |
| 2 | Wire Stripper | DC and AC power cables |
| 3 | 10 and 13 mm Socket Wrench | Cover Panels and ground stud |
| 4 | Slot Screwdriver, 5/64 in. | Field assembly connectors |
| 5 | 1/4 in. Nut Driver | Hose clamps |
| 6 | Greenlee K05-Synchro Crimp Tool, or equivalent | Ground cable |
| 7 | Utility Knife | Scoring cable jackets |
| 8 | Hoist, Forklift, or Crane | Unpacking and Lifting Seakeeper 4.5 into position |
| 9 | Drill/Drill Press | Bolt hole penetrations |
| 10 | 1/2 in. Drive Torque Wrench | Foundation bolt torqueing |
| 11 | 22 mm Socket Wrench | Foundation bolts |
| 12 | Heat Gun | For conductor heat shrink |
| 13 | Hole Saw | Through-hull seawater fittings |