Speed Adjustment

When cruising without Seakeeper stabilization, run the Seakeeper at 1000 RPM to maintain lubrication of the bearings. The Seakeeper will use less than 300 W of AC power while operating in this mode.

1. Press the Menu button , then select the Settings screen .
2. Select the desired RPM button to adjust the Seakeeper’s speed. The selected RPM button will turn blue. Speed selection buttons shown below are examples and may not match operating speed of installed Seakeeper.

• Seakeeper 35: Normal operational speed is 5150 RPM. Quiet mode operates at 4000 RPM, which allows stabilization at a reduced flywheel speed. After a 24 V power cycle to the Seakeeper, the speed selection will revert to 5150 RPM.
• Seakeeper 30HD: Normal operational speed is 4400 RPM. Quiet mode operates at 3500 RPM, which allows stabilization at a reduced flywheel speed. After a 24 V power cycle to the Seakeeper, the speed selection will revert to 4400 RPM.