230 VAC Failure

If the AC power is not connected, a notification screen will indicate “AC Mains Low”. If the failure is not corrected within two minutes, an “AC Mains Low” alarm will occur. The brake will lock and the Seakeeper will stop moving if stabilization was on.

• Verify the boat’s circuit breaker supplying 208-230 VAC to the Motor Drive Box has not tripped.
• When 208-230 VAC is restored, the display will power up, the Splash Screen will appear, and then the Home Screen will appear.
• Press Power On/Off button to clear the alarm. The progress bar will appear and indicate flywheel speed. When the flywheel is at minimum operating speed, the Stabilize button will appear so stabilization can be turned on. This may take up to 30 minutes, depending on the speed of the flywheel when the 208-230 VAC is turned back on.