Seakeeper 3 Installation Manual (90378-6); S/N 3-223-3836 to 3-231-4222
3.1 Electrical Installation Introduction
This section for electrical installation explains how to mount the electrical equipment and how to connect the electrical cables.
Reference Documents:
- 90377 – Seakeeper 3 Cable Block Diagram
- 90467 – Second Helm Station 5″ Display
- 90558 – ConnectBox Helm Mounting Kit
- TB-90191 – Seawater Cooling Pump Recommendations
- TB-90575 – DC Installation Kits
- TB-90621 – Seakeeper Battery Sizing Recommendations
- Seakeeper Compatibility Technical Bulletins
The following images (Figure 1) show the electrical equipment included with the Seakeeper 3 Hardware Scope of Supply (Drawing No. 90388):



16.4 ft (5 m) (20334)

19.7 ft (6 m)(30332)

16.4 ft (5 m) (30327)
Figure 1 – Electrical Equipment for Seakeeper 3