Electrical Equipment Mounting

Precautions: Each item of electrical equipment has specific mounting instructions. These instructions
should be followed to ensure proper function of the Seakeeper.

Do NOT move Seakeeper mounted components from their
locations or incorrect Seakeeper operation will result.

1. Touch Display Mounting Instructions, Surface Mount
   1. Console space required: Approx. 5.24 W x 3.70 H in. (133 x 94 mm)
   2. Mounting Instructions, Surface Mount: See Drawing No. 90438 – 5″ Operator Display Envelope and Mounting Details, for details.
2. CAN Communications Tee Adapter and Terminator Mounting Instructions
   1. Console space required, Rear: Approx. 4 W x 3 H in. (102 x 76 mm), rear
   2. Mounting Instructions: Rear mount on vessel console panel, within 2 ft (0.6 m) of Display.
   3. Hardware required: One mounting screw for .197 in. (5 mm) diameter mounting hole on Tee Adapter.