Seakeeper 2 Installation Manual (90488-3); S/N 2-203-0400 to 2-232-1563
Seakeeper Optional DC Seawater Pump
- Seakeeper offers a self-priming DC Seawater pump as an optional addition, P/N 30331 – DC Seawater Pump Assembly, shown in the following Figure.
- The Seakeeper Seawater Pump is a 24 VDC pump operated at 12 VDC for the Seakeeper 2 and maintains a seawater flow of approximately 2.5 GPM (9.5 LPM) at 12 VDC.
- The pump assembly is pre-wired for connection to Seakeeper 2 Cable 5 and includes a seawater strainer and various fittings. The pump specifications are as follows:
| Volts | 24 VDC (intended for 12 VDC operation with Seakeeper 2) |
| Flowrate | 2.5 GPM (9.5 LPM), at 12 VDC |
| Overcurrent Protection Rating | 15 A |
| Ignition Protection Rating | ISO 8846 or equivalent |
NOTE: Use only SeaFlo-provided threaded fittings for DC Seawater Pump 30331.