Seakeeper 18 Installation Manual (90672-2); S/N 18-234-2475 to Current
5.2 Required Supplies for Seakeeper Installation
Required supplies needed for Seakeeper installation
(Not supplied with the Seakeeper)
| Item | Description | Qty | Section | Other Reference | System |
| 1 | Adhesive and cleaning supplies for bonding to hull | Mechanical Installation Bond-In Installation | Mechanical | ||
| 2 | Soundproofing considerations | Selection of Installation Location | Mechanical | ||
| 3 | Spreader bar for lifting Seakeeper | 1 | Transport and Unpacking | Mechanical | |
| 4 | Hose clamps for seawater plumbing to 3/4 in. (19 mm) hose barb (2 per hose) | 4 | Connecting Seawater to Heat Exchanger | Cooling | |
| 5 | Circuit breaker, AC, 2-pole, 30 A | 1 | Electrical Equipment Power Connections | Dwg 90679 | Electrical |
| 6 | Circuit breaker, DC, 1-pole, 10 A | 1 | Electrical Equipment Power Connections | Dwg 90679 | Electrical |
| 7 | M6 terminal lug for grounding Seakeeper at rear brace | 1 | Electrical Equipment Ground Connections | Electrical | |
| 8 | Cable, 10 AWG, for grounding Seakeeper at rear brace to vessel ground | AR | Electrical Equipment Ground Connections | Dwg 90679 | Electrical |
| 9 | Seawater pump, 24 VDC (Optional Seakeeper supplied) | 1 | Electrical Equipment Power Connections | Dwg 30322 | Electrical |
| 10 | Circuit breaker, DC, 1-pole, Current rated for SW pump | 1 | Electrical Equipment Power Connections | Dwg 90679 | Electrical |
| 12 | Sili-Thane 803 Sealant (or equivalent) | AR | Mechanical Installation | Mechanical | |
| 13 | Nickel-based Anti-seize | AR | Mechanical Installation | Mechanical |
Dwg = Drawing