2.4.3 Bolt-in Installation

Blind-Hole Instructions

1. Remove Template Fixture and drill SIXTEEN (16) 0.571 in. ø (14.5 mm ø) holes perpendicular to the vessel structure to a minimum depth of 0.84 in. (21 mm). Take special care to drill perpendicular to mounting surface.
2. Tap drilled holes for M14-2.0 threaded inserts.
3. Install 16 M14-2.0 x 1.5 in. D (21 mm length) locking threaded inserts into holes in hull structure at drilled and tapped locations using threaded insert manufacturer provided installation tool.
4. Remove threaded insert prong / tag after threaded inserts are installed.

Through-bolt Instructions

Remove Template Fixture and drill sixteen(16) 0.59 IN. (15 mm) ø perpendicular to the vessel structure. Take special care to drill perpendicular to mounting surface. A drill guide is recommended.