4.2 12 VDC High Current Failure

If the 12 VDC high current is disconnected during operation, a notification screen will indicate “High Current DC Voltage Low”. If the failure is not corrected within two minutes, a “High Current DC Voltage Low” alarm will occur. The brake will lock.

• Verify the boat’s circuit breaker or fuse supplying +12 VDC high current has not tripped or blown.
• When +12 VDC high current is restored, operation may be restored.
• Press Power On/Off button . The progress bar will appear and indicate flywheel speed. When the flywheel is at minimum operating speed, the Stabilize button will appear so stabilization can be turned on. This may take up to 30 minutes, depending on the speed of the flywheel when the +12 VDC high current is restored.