Seakeeper 3 Operation Manual (90379-5) 3-232-4223 to Current
5.2 Scheduled Maintenance Table
The following pages contain the scheduled maintenance table organized by systems: Mechanical, Hydraulic, Cooling, and Electrical. Recommended scheduled maintenance is not covered under warranty.
- Scheduled Maintenance should be performed by a Seakeeper trained factory technician or trained technician within the Seakeeper Dealer network. Find a local Dealer on our website at Seakeeper Dealer Locator.
- A Seakeeper technician or Dealer is required to perform a brake service and to replace brake bushings or other brake components. This requires a complete flush, bleed, purge and pressurization of the closed hydraulic system.
- Scheduled Maintenance and the replacement of ‘wear’ items are not covered by the standard warranty. Visit https://www.seakeeper.com/standard-warranties/dc-powered-models/.
| System / Component | Task | Interval | Parts / Special Tools |
|---|---|---|---|
| MECHANICAL / FOUNDATION | |||
| All Mounting Hardware | Inspect | 12 Months | |
| BRAKE SYSTEM | |||
| Hydraulic Manifold Components & Fittings | Inspect for leaks | 12 Months or 1000 Run-Hours | |
| Brake Bushings | Inspect | 12 Months or 1000 Run-Hours | |
| Brake Bushings | Replace | 2000 Run-Hours/As Needed | |
| COOLING SYSTEM | |||
| Heat exchanger | Inspect for leaks | 12 Months or 1000 Run-Hours | |
| Heat Exchanger | Replace | 2000 Run-Hours/As Needed | |
| Heat Exchanger | Clean/Descale | 12 Months or 1000 Run-Hours | |
| Coolant Level-Glycol | Inspect/Fill | 12 Months or 1000 Run-Hours | Anti-freeze – 50/50 Ethylene Glycol mix. |
| Seawater Flow | Check seawater flow | 12 Months or 1000 Run-Hours | |
| Coolant Hoses | Inspect for leaks | 12 Months or 1000 Run-Hours | |
| Coolant Glycol | Inspect/Replace | 12 Months or 1000 Run-Hours | Anti-freeze – 50/50 Ethylene Glycol mix. |
| ELECTRICAL | |||
| Electrical Connections, Cables, and Components | Inspect for damage | 12 Months |