2.2. Home | Manual Mode

In Manual Mode, the operator is in direct control of the Controllers. The system will not actively respond to waves, wakes, and other forces, and the Blades will remain in the position set by the operator via the MFD or Keypad. The operator inputs are indicated by illuminated LED lights on the optional Keypad or in the gauges on the MFD display.

1

Auto / Manual Button

2

Up Directional Arrow

3

Left Directional Arrow

4

Right Directional Arrow

5

Down Directional Arrow

6

Port Command Indicator

7

Starboard Command Indicator

8

Menu
  1. Auto / Manual Button
  2. Up Directional Arrow
  3. Left Directional Arrow
  4. Right Directional Arrow
  5. Down Directional Arrow
  6. Port Command Indicator
  7. Starboard Command Indicator
  8. Menu

1

Port Command Indicator

2

Starboard Command Indicator
  1. Port Command Indicator
  2. Starboard Command Indicator

Auto / Manual Button

The button in the middle of the directional arrow pad allows the user to toggle between Auto Mode and Manual Mode.

Port and Starboard Command Indicators

The Command Indicators show how far each Controller Blade is deployed. If the Port Command Indicator is filled in blue, the port side Controller Blade is deployed fully, which will cause the boat to keel to the starboard side, and vice versa.

Up & Down Directional Arrows

Pressing the up and down arrows in Manual Mode will move the Controller Blades up and down together. Pressing the up arrow will lower the bow and pressing the down arrow will allow the bow to raise. The blue bars in the Command Indicators will move correspondingly.

Left & Right Directional Arrows

The left directional arrow moves the starboard side Controller Blade down, causing the boat to heel to the port side. The right directional arrow moves the port side Controller Blade down, causing the boat to heel to the starboard side. The blue bars in the Command Indicators will move to match the position of the Blade on that side. If there is a command present on one side and the opposing arrow is pressed, the system will level out by bringing the Controller Blades closer to one another.

Menu Button

When the Menu button is pressed, the Menu bar will appear or disappear at the bottom of the screen.