Scheduled Maintenance Table

This page contains the scheduled maintenance table organized by systems: Mechanical, Hydraulic, Cooling, and Electrical. Scheduled maintenance is not covered under warranty.

  • Scheduled Maintenance should be performed by a Seakeeper trained factory technician or trained technician within the Seakeeper Dealer network. Find a local Dealer on our website at www.seakeeper.com/find-us/.
  • A Seakeeper technician or Dealer is required to perform a brake service and to replace brake bushings or other brake components. This requires a complete flush, bleed, purge and pressurization of the closed hydraulic system.
  • Scheduled Maintenance and the replacement of ‘wear’ items are not covered by the www.seakeeper.com/extended-warranty/recreation-warranty/.
System / ComponentTaskIntervalParts / Special Tools
MECHANICAL / FOUNDATION
All Mounting HardwareInspect12 Months
BRAKE SYSTEM
Hydraulic Manifold Components & FittingsInspect for leaks12 Months or 1000 Run-Hours
Hydraulic Cylinders & HosesInspect for leaks12 Months or 1000 Run-HoursHydraulic Hand Pump Kit
Hydraulic AccumulatorsReplace2000 Run-Hours/As Needed
Hydraulic OilFlush & Bleed1000 Run-Hours
Brake BushingsInspect12 Months or 1000 Run-Hours
Brake BushingsReplace2000 Run-Hours/As Needed
COOLING SYSTEM
Heat exchangerInspect for leaks12 Months or 1000 Run-Hours
Heat ExchangerReplace2000 Run-Hours/As Needed
Heat ExchangerClean/Descale12 Months or 1000 Run-Hours
Coolant Level-GlycolInspect/Fill12 Months or 1000 Run-HoursAnti-freeze – 50/50 Ethylene Glycol mix.
Seawater FlowCheck seawater flow12 Months or 1000 Run-Hours
Coolant HosesInspect for leaks12 Months or 1000 Run-Hours
Coolant GlycolInspect/Replace12 Months or 1000 Run-HoursAnti-freeze – 50/50 Ethylene Glycol mix.
ELECTRICAL
Electrical Connections, Cables, and ComponentsInspect for damage12 Months