5. Inventory Parts

Please ensure all parts are present in the package before proceeding. If any parts are missing, contact the seller.

1. Software Module

2. Distribution Module*

3. Keypad (Optional, Purchased Separately)

Table 1 – Electrical Mounting and Wiring Components

Software Module Mounting Hardware	Distribution Module Mounting Hardware*
Phillips No. 10 x 1 in. Screw	Distribution Module Mounting Bracket	Phillips No. 12 x 0.75 in. Screw	M4 x 10 mm Flat Head Socket Cap Screw
Distribution Module Wiring Components*
Ampseal Housing Backshell	Ampseal Housing	Ampseal Cavity Sealing Plug	90 Degree Crimp Connect
Distribution Module Wiring Components Cont.*
Controller Cable Heat Shrink 0.75 x 1.5 in.	Grounding Wire Heat Shrink 0.375 x 1 in.	M6 Grounding Split Lock Washer	M6-1.0 x 12 mm Hex Head Grounding Screw
Seakeeper Ride Proprietary CAN Bus Components
x4* Double Ended NMEA 2000 Cable Lengths 0.6, 1, 6, 10 m (2.0, 3.3, 19.7, 32.8 ft)	Distribution Module Power Cable	Ethernet Adapter Cable (Purchased Separately)	x2* CAN Bus Tee
Seakeeper Ride Proprietary CAN Bus Components Cont.
Powered CAN Bus Tee	Phillips No. 6 x 1.25 in. Screw	Male CAN Bus Terminator	Female CAN Bus Terminator
Keypad Components (Optional)
M8 Threaded Stud	Keypad Mounting Bracket	M8 Wingnut	Double Ended NMEA 2000 Cable 3 m (9.8 ft)
x1

*Quad Actuator systems will include two (2) times all Distribution Module components shown, one (1) additional NMEA Cable, and one (1) additional NMEA Tee.