4. Tools and Equipment Needed

4.1. Equipment

• 25 Amp Circuit Breaker or Fuse (30 Amp for Quad Actuator System)
• 8-Gauge Grounding Wire
• 12-Gauge Power Wire Copper Tinned (*Optional)
• Adhesive-Lined Heat Shrink (for power cables)

*Power cables will be included with Seakeeper Ride. However, installers may choose to create their own power cable. See Section 8 for more details.

4.2. Tools

• Drill
• Level
• 1/8 in. Drill Bit
• 1/4 in. Drill Bit
• Phillips Head Screwdriver
• Oscillating Tool or Jig Saw
• Heat Gun
• Crimpers
• Wire Strippers
• Terminals for Cable-to-Battery Connection
• Work Light or Flashlight
• Fish Tape or Electricians Snake

4.3. Boat Features Requirements

• 12 Volt Power Controlled by Battery Isolation Switch/Keyswitch
• GPS with NMEA 2000 Network Backbone
• Seakeeper Compatible MFD
  • Ensure the MFD has the latest version of the Seakeeper software before using the Seakeeper Ride system