Seakeeper 10.5 Installation Manual (90841-4) 10-263-0001 to Current
2.3.2 Transfer of Holes to Boat Structure
- Lower assembled fixture onto hull structure, see Figure 8.
- The four areas where the feet of the Seakeeper will rest should be coplanar to within 0.06 in. (1.5mm).
- Align fixture in desired location and transfer holes from fixture plate to the hull structure by transfer punch.
Note: Holes in fixture plate are ΓΈ 0.594 in. (15 mm).
Do not use fixture as a drill guide.
Seakeeper recommends use of a drill guide to ensure perpendicularity.
