4. Blade and Seal Plate Removal

If a Blade or Seal Plate is broken or needs to be removed for any other reason, refer to the steps below. Note that the various Ride controllers have different quantities of hardware depending on the specific model.

1. Remove the Blade by unscrewing the four (4) M8-1.25 x 20 mm screws and their washers.

2. With the Blade removed, begin removing the Seal Plate by unscrewing the M6-1.0 x 16 mm Allen head screws on the underside of the Seal Plate.

3. Finish removing the Seal Plate by unscrewing the M6-1.0 x 30 mm bolts and washers on the front of the Seal Plate.