2.4 Settings

The Settings page allows for adjustment to the System, GPS, and Trim Command Curve (TCC).

System

The System page allows the operator the ability to adjust position of the Home and Menu buttons from top right (default) to top left of the page.

Adapt Settings allows the operator to adjust the system for RF Disable (Autopilot) Instructions.

The Keypad Settings allow the operator to adjust Keypad backlight for day (bright) or night (dim) display and the Brightness allows for finite changes to the backlight. When on this screen the operator can select the + button to increase the brightness and the – sign to decrease the brightness. The percentages chosen are different for Day and Night. Once both day and night have been set and they are clear and visible, select the Home button to return to the Home Screen.

Note: The pages below are examples and may not match information details of the installed Seakeeper Ride system.

GPS

The GPS page displays the selected GPS Source. By default, Seakeeper Ride will select the source available on the NMEA 2000 Bus with the lowest EPE and HDOP. This page allows the operator to manually override the GPS source selection if desired. The GPS source will show the GPS manufacturer currently selected and other live data GPS statuses.

Note: The pages below are examples and may not match information details of the installed Seakeeper Ride system.

Trim Command Curve

The Trim Command Curve (TCC) is covered in detail in Section 3.3. Please read the full Operation Manual carefully before making changes to the Trim Command Curve.

Note: The pages below are examples and may not match information details of the installed Seakeeper Ride system.