{"id":4917,"date":"2021-07-30T15:59:14","date_gmt":"2021-07-30T15:59:14","guid":{"rendered":"https:\/\/manuals.seakeeper.com\/seakeeper-26-20hd-installation-manual-copy\/start-up\/start-up-instructions\/"},"modified":"2021-08-04T19:05:30","modified_gmt":"2021-08-04T19:05:30","slug":"start-up-instructions","status":"publish","type":"page","link":"https:\/\/manuals.seakeeper.com\/seakeeper\/seakeeper-35-installation-manual\/start-up\/start-up-instructions\/","title":{"rendered":"Start Up Instructions"},"content":{"rendered":"\n
  1. Energize 24 VDC supply at the customer-supplied electrical disconnect.<\/li>
  2. Supply 208-230 VAC to Motor Drive Box at customer-supplied electrical disconnect.<\/li>
  3. If seawater pump for the Seakeeper<\/span> is not supplied through cable from Motor Drive Box, turn on the boat\u2019s AC or DC circuit breaker that supplies power to the seawater pump<\/li>
  4. With system powered up check the display for any ALARMS. If there are any ALARMS present, they must be corrected first.<\/li>
  5. Press the Seakeeper<\/span> ON\/OFF Button on Display. \"\" The progress bar will appear and indicate how soon the Seakeeper<\/span> will be available for stabilization. When the Seakeeper<\/span> is initialized and up to minimum operating speed, the stabilize button \"\" will appear. At this point, the Seakeeper<\/span> is available for stabilization.<\/li><\/ol>\n\n\n\n
    \n
    \n
    \"\"<\/figure>\n<\/div>\n\n\n\n
    \n
    \"\"<\/figure>\n<\/div>\n<\/div>\n\n\n\n
    1. The seawater pump should have started when the ON\/OFF button on the display was depressed. Confirm pump operation and flow rate, if practical. Required flow is 10 GPM (38 LPM) minimum and 14 GPM (53 LPM) maximum. <\/li>
    2. Verify that there are no ALARMS present. If an ALARM is present it will be displayed.<\/li>
    3. When the Seakeeper<\/span> reaches its maximum operating speed where maximum stabilization is available, the progress bar will disappear and the Seakeeper<\/span> is available for maximum stabilization. Press the stabilize button. \"\" The button will turn blue indicating that the Seakeeper<\/span> is stabilizing the roll motion.<\/li><\/ol>\n\n\n\n
      \n
      \n
      \"\"<\/figure>\n<\/div>\n\n\n\n
      \n
      \"\"<\/figure>\n<\/div>\n<\/div>\n\n\n\n
      1. Verify that there are no ALARMS. If an ALARM is present it will be displayed.<\/li>
      2. Press the STABILIZE Button \"\" to turn stabilization off. Then press the Seakeeper<\/span> ON\/OFF Button \"\" to power the Seakeeper<\/span> down.<\/li>
      3. During normal operation, the Seakeeper<\/span> should be stopped when stabilization is no longer required. This maximizes long term life as it allows the Seakeeper<\/span> to start the coast down cycle before cooling is shutoff. Once the vessel is secured in the slip and the crew has shut down the generator and engines, the AC and DC breakers that control the Seakeeper<\/span> should be switched to the OFF position. The Seakeeper<\/span> will continue to spool down to 0 RPM. No cooling is required during this time. Note the Seakeeper<\/span> 35 will take 5+ hours to coast down to 0 RPM from full speed. When the flywheel has stopped the Display will indicate 0 RPM.<\/li><\/ol>\n\n\n\n
        \"\"<\/figure><\/div>\n","protected":false},"excerpt":{"rendered":"

        Energize 24 VDC supply at the customer-supplied electrical disconnect. Supply 208-230 VAC to Motor Drive Box at customer-supplied electrical disconnect. If seawater pump for the Seakeeper is not supplied through cable from Motor Drive Box, turn on the boat\u2019s AC or DC circuit breaker that supplies power to the seawater pump With system powered up […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":4913,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"manual":[196],"model":[],"document_type":[],"hidden":[],"class_list":["post-4917","page","type-page","status-publish","hentry","manual-seakeeper-35-installation-manual"],"acf":[],"_links":{"self":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/4917","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/comments?post=4917"}],"version-history":[{"count":3,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/4917\/revisions"}],"predecessor-version":[{"id":5074,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/4917\/revisions\/5074"}],"up":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/4913"}],"wp:attachment":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/media?parent=4917"}],"wp:term":[{"taxonomy":"manual","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/manual?post=4917"},{"taxonomy":"model","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/model?post=4917"},{"taxonomy":"document_type","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/document_type?post=4917"},{"taxonomy":"hidden","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/hidden?post=4917"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}