![\"\"](\"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-content\/uploads\/Check-mark.png\")
Seakeeper<\/span> foundation installed per requirements of Drawing No. 90726 \u2013 Seakeeper<\/span> 4, 4.5, & 5 Bolt-In Installation Details.<\/p>\n\n\n\n
Structure designed to accommodate Seakeeper<\/span> 5 forces, as defined in Foundation is coplanar within 0.06 in. (1.5 mm).<\/p>\n\n\n\n Connect wire end to 12 VDC power at customer-supplied connection Plug connector of Cable 1 into mating connector on Seakeeper<\/span> wire Connect wire end to 12 VDC power at customer-supplied connection Plug connector of DC SW Pump Input cable into mating connector on Seakeeper<\/span> wire Connect DC SW Pump Output cable from SW PUMP VDC OUT to customer-supplied SEAKEEPER DISPLAY CONNECTION<\/strong><\/p>\n\n\n\n NMEA 2000 NETWORK CONENCTION<\/strong><\/p>\n\n\n\n SPOOL POWER MODE SELECTION<\/strong><\/p>\n\n\n\n The Seakeeper<\/span> 5\u2019s factory-configured Default Spool mode reaches its 10,350 RPM operating speed in 24 minutes using 3500 W during startup. Vessels with limited generator capacity can select Low-Power Spool mode on the display\u2019s Settings page to reduce startup demand to 2300 W, although the flywheel will take longer to reach operating speed. The selected spool mode remains in effect after a power cycle.<\/p>\n\n\n Optional seawater pump can be purchased through Seakeeper<\/span> (P\/N 30331)<\/p>\n\n\n\n Verify 2 GPM (7.5 LPM) minimum and 4 GPM (15.1 LPM) maximum flow rate.<\/p>\n\n\n\n 6.2.1 Mechanical Checklist Seakeeper foundation installed per requirements of Drawing No. 90726 \u2013 Seakeeper 4, 4.5, & 5 Bolt-In Installation Details. Structure designed to accommodate Seakeeper 5 forces, as defined in Drawing 90726 – Seakeeper 4, 4.5, & 5 Bolt-In Details, with a minimum safety factor of 2.0. Foundation is coplanar within 0.06 in. (1.5 […]<\/p>\n","protected":false},"author":9,"featured_media":0,"parent":21487,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"manual":[375],"model":[],"document_type":[],"hidden":[],"class_list":["post-21491","page","type-page","status-publish","hentry","manual-seakeeper-5-installation-manual"],"acf":[],"_links":{"self":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/21491","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/comments?post=21491"}],"version-history":[{"count":6,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/21491\/revisions"}],"predecessor-version":[{"id":22856,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/21491\/revisions\/22856"}],"up":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/21487"}],"wp:attachment":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/media?parent=21491"}],"wp:term":[{"taxonomy":"manual","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/manual?post=21491"},{"taxonomy":"model","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/model?post=21491"},{"taxonomy":"document_type","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/document_type?post=21491"},{"taxonomy":"hidden","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/hidden?post=21491"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Drawing 90726 – Seakeeper<\/span> 4, 4.5, & 5 Bolt-In Details, with a minimum safety
factor of 2.0.<\/p>\n\n\n\n Clearances around Seakeeper<\/span> meet service and operating specifications
and no obstructions are within the Seakeeper<\/span> envelope.<\/p>\n\n\n\n Seakeeper<\/span> 4, 4.5, & 5 Bolt-In Kit is installed (P\/N 90804 – Blind Hole Installation) (P\/N 90805 – Thru-Hole Installation).<\/p>\n\n\n\n Foundation bolts torqued to specification: 155 ft-lbs (210 Nm).<\/p>\n\n\n\n6.2.2 Electrical Checklist<\/h3>\n\n\n\n
Ground Cable<\/strong> (Customer Supplied) ground cable connected on both ends.<\/p>\n\n\n\n 12 VDC Control Power Cable<\/strong> (Seakeeper<\/span> Supplied) <\/p>\n\n\n\n
box or directly to circuit breaker.<\/p>\n\n\n\n
harness (INPUT POWER).<\/p>\n\n\n\n Seawater Pump Input Power Cable<\/strong> (Seakeeper<\/span> Supplied)<\/p>\n\n\n\n
box or directly to circuit breaker.<\/p>\n\n\n\n
harness (SW PUMP VDC IN).<\/p>\n\n\n\n Seawater Pump Output Cable<\/strong> (Seakeeper<\/span> Supplied)<\/p>\n\n\n\n
12 VDC seawater pump.
<\/p>\n\n\n\n Ensure a compatible MFD installed (refer to Seakeeper<\/span> MFD Compatibility
Technical Bulletins)
<\/p>\n\n\n\n Required GPS signal on NMEA 2000 backbone<\/p>\n\n\n\n Connect NMEA CAN Cable<\/strong> to ConnectBox NMEA port.<\/p>\n\n\n\n Connect NMEA CAN Cable<\/strong> to vessel NMEA backbone.<\/p>\n\n\n\n![\"\"](\"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-content\/uploads\/SK5-Spool-Options.png\")
<\/figure>\n<\/div>\n\n\n Default Power mode<\/p>\n\n\n\n Low Power mode<\/p>\n\n\n\n6.2.3 Cooling Checklist<\/h3>\n\n\n\n
Install 12 VDC seawater pump capable of required flow rates.<\/p>\n\n\n\n Route and connect seawater inlet and outlet hoses per 909482 – Seakeeper<\/span> 5
Cooling Water Schematic.<\/p>\n\n\n\n Test seawater pump with Seawater Override<\/p>\n\n\n\n Verify coolant level at bottom of filler neck in reservoir.<\/p>\n","protected":false},"excerpt":{"rendered":"