Reference Section: 2.0 Mechanical Installation<\/p>\n\n\n\n Reference Document: Seakeeper<\/span> 3 Cable Block Diagram Reference Section: 4.0 Cooling Installation<\/p>\n\n\n\n 6.2.1 Mechanical Checklist Reference Section: 2.0 Mechanical Installation CHECK REQUIREMENT TO BE MET Seakeeper foundation installed per requirements of the Seakeeper 3 Bolt-in Installation Details. * Structure designed to accommodate Seakeeper 3 forces, as defined in Drawing No. 90374 with a minimum safety factor of 3.0.* Foundation is co-planar within 0.06\u2033 (1.5 mm). Clearances around […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":14268,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"manual":[293],"model":[],"document_type":[],"hidden":[],"class_list":["post-14274","page","type-page","status-publish","hentry","manual-seakeeper-3-installation-manual-90378-7"],"acf":[],"_links":{"self":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/14274","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/comments?post=14274"}],"version-history":[{"count":5,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/14274\/revisions"}],"predecessor-version":[{"id":14825,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/14274\/revisions\/14825"}],"up":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/14268"}],"wp:attachment":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/media?parent=14274"}],"wp:term":[{"taxonomy":"manual","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/manual?post=14274"},{"taxonomy":"model","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/model?post=14274"},{"taxonomy":"document_type","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/document_type?post=14274"},{"taxonomy":"hidden","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/hidden?post=14274"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}C<\/b>HECK<\/strong><\/td> REQUIREMENT TO BE MET<\/strong><\/td><\/tr> <\/td> Seakeeper<\/span> foundation installed per requirements of the Seakeeper<\/span> 3 Bolt-in
Installation Details.
* Structure designed to accommodate Seakeeper<\/span> 3 forces, as defined in Drawing No. 90374 with a minimum safety factor of 3.0.
* Foundation is co-planar within 0.06\u2033 (1.5 mm).<\/td><\/tr><\/td> Clearances around Seakeeper<\/span> meet service and operating specifications and no obstructions are within the Seakeeper<\/span> envelope.<\/td><\/tr> <\/td> Seakeeper<\/span> 3 Bolt-In Kit (P\/N 90375) or Through-bolt Kit (P\/N 90641) is installed with a minimum thread engagement of 0.8\u2033 (20.42 mm) or bolt passing entirely through backing nut.
* If longer mount bolts are required, they should match the M16-2.0, Grade10.9 specification provided. Stainless steel mounting bolts cannot be used for the Seakeeper<\/span> 3.<\/td><\/tr><\/td> Foundation bolts torqued to specification: 155 ft-lbs (210 Nm).<\/td><\/tr> <\/td> Seakeeper<\/span> 3 cover can be removed to access and service the unit.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n 6.2.2 Electrical Checklist<\/h2>\n\n\n\n
Reference Section: 3.0 Electrical Installation<\/p>\n\n\n\n6.2.2.1 High Current 12 VDC Power Source<\/h3>\n\n\n\n
CHECK<\/strong><\/td> REQUIREMENT TO BE MET<\/strong><\/td><\/tr> <\/td> Connect High Current DC Input cables (P\/N: 20335 and 20336) to customer supplied 2 AWG B+ and B- conductors to allow for routing to 12 VDC power source.
* Connect High Current DC Input B+ conductor (red) through 100 A circuit breaker(customer-supplied) and a dedicated battery isolation switch (customer-supplied), directly to the battery positive terminal or bus bar.
* Connect High Current Input B- conductor (black) to battery negative terminal or DC negative bus bar.<\/td><\/tr><\/td> If the 2 AWG high-current 12V power input conductors are shortened or lengthened, use heavy-duty eyelet (closed end) terminals such as Molex19221-0235.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n 6.2.2.2 Low Current 12 VDC Power Source<\/h3>\n\n\n\n
CHECK<\/strong><\/td> REQUIREMENT TO BE MET<\/strong><\/td><\/tr> <\/td> Connect DC Input positive (red) cable (P\/N: 20248) directly to a customer-supplied 15 A circuit breaker, then to the dedicated battery isolation switch<\/td><\/tr> <\/td> Connect DC Input negative (black) cable (P\/N: 20248) to the DC negative bus bar or battery negative terminal.<\/td><\/tr> <\/td> Plug DC Input Cable connector end into the DT-Series connector labelled Low-Current 12 VDC in connector on the Seakeeper<\/span> wire harness.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n 6.2.2.3 Seawater Pump Connection<\/h3>\n\n\n\n
CHECK<\/strong><\/td> REQUIREMENT TO BE MET<\/strong><\/td><\/tr> <\/td> Connect Seawater Pump Input positive (red) cable (P\/N: 30327) directly to a customer-supplied circuit breaker corresponding to the seawater pump overcurrent protection rating (max 15 A), then to the dedicated battery isolation switch.<\/td><\/tr> <\/td> Connect Seawater Pump Input negative (black) cable (P\/N: 30327) to the DC main negative bus bar or battery negative terminal.<\/td><\/tr> <\/td> Connect Seawater Pump Output cable (P\/N: 20334) receptacle end (pins) to Seakeeper<\/span> SW Pump 12 VDC Out and the plug end (sockets) to customer-supplied 12 VDC seawater pump cable Deutsch connector termination.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n 6.2.2.4 Ground Connection<\/h3>\n\n\n\n
CHECK<\/strong><\/td> REQUIREMENT TO BE MET<\/strong><\/td><\/tr> <\/td> Install lugs on both ends of customer-supplied 4 AWG ground cable.<\/td><\/tr> <\/td> Connect one end of ground cable to nearest vessel ground and other end to ground stud on Seakeeper<\/span> frame.<\/td><\/tr> <\/td> Vessel grounding bus to comply with:
* EM\/IEC 60204-1 Clauses 6.3.3 and 8.2.3
* ABYC E-11 July 2018 Clauses 11.5.2 and 11.16.1.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n6.2.3 Cooling Checklist<\/h2>\n\n\n\n
CHECK<\/strong><\/td> REQUIREMENT TO BE MET<\/strong><\/td><\/tr> <\/td> Purchase seawater pump for Seakeeper<\/span> 3 to provide 2 \u2013 6 GPM (7.6 \u2013 22.7 LPM) with a max overcurrent protection rating of 15 A. Optional seawater pump can be purchased through Seakeeper<\/span>, P\/N 30331.<\/td><\/tr> <\/td> Connect and route 3\/4\u2033 (19 mm) seawater inlet hose from seacock valve to the seawater strainer, seawater pump, and then to the Seakeeper<\/span> 3 heat exchanger inlet.<\/td><\/tr> <\/td> Connect and route 3\/4\u2033 (19 mm) seawater outlet hose from Seakeeper<\/span> 3 heat exchanger outlet to the seawater overboard.<\/td><\/tr> <\/td> Test seawater pump:
* Verify 2 GPM (7.6 LPM) minimum and 6 GPM (22.7 LPM) maximum seawater flow through heat exchanger under all operating conditions of the vessel.<\/td><\/tr><\/td> Verify coolant level in heat exchanger coolant reservoir, fill if needed.<\/td><\/tr><\/tbody><\/table><\/figure>\n","protected":false},"excerpt":{"rendered":"