![\"\"](\"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-content\/uploads\/Check-mark.png\")
Seakeeper<\/span> foundation installed per requirements of Drawing No. 90726 \u2013 Seakeeper<\/span> 4 & 4.5 Bolt-In Installation Details.<\/p>\n\n\n\n
Structure designed to accommodate Seakeeper<\/span> 4.5 forces, as defined in Foundation is coplanar within 0.06 in. (1.5 mm).<\/p>\n\n\n\n Connect wire end to 12 VDC power at customer-supplied connection Plug connector of Cable 1 into mating connector on Seakeeper<\/span> wire Connect wire end to 12 VDC power at customer-supplied connection Plug connector of Cable 9 into mating connector on Seakeeper<\/span> wire Connect Cable 5 from SW PUMP VDC OUT to customer-supplied SEAKEEPER DISPLAY CONNECTION<\/strong><\/p>\n\n\n\n Option 1:<\/strong> Compatible MFD (refer to Seakeeper<\/span> MFD Compatibility Option 2:<\/strong> Seakeeper<\/span> 5″ Touch Display (P\/N 90600) NMEA 2000 NETWORK CONENCTION<\/strong><\/p>\n\n\n\n Optional seawater pump can be purchased through Seakeeper<\/span> (P\/N 30331)<\/p>\n\n\n\n Verify 2.5 GPM (9.5 LPM) minimum and 4 GPM (15.1 LPM) maximum flow rate.<\/p>\n\n\n\n 6.2.1 Mechanical Checklist Seakeeper foundation installed per requirements of Drawing No. 90726 \u2013 Seakeeper 4 & 4.5 Bolt-In Installation Details. Structure designed to accommodate Seakeeper 4.5 forces, as defined in Drawing 90726 – Seakeeper 4 & 4.5 Bolt-In Details, with a minimum safety factor of 2.0. Foundation is coplanar within 0.06 in. (1.5 mm). Clearances […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":13840,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"manual":[289],"model":[],"document_type":[],"hidden":[],"class_list":["post-13890","page","type-page","status-publish","hentry","manual-seakeeper-4-4-5-installation-manual"],"acf":[],"_links":{"self":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/13890","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/comments?post=13890"}],"version-history":[{"count":7,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/13890\/revisions"}],"predecessor-version":[{"id":21139,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/13890\/revisions\/21139"}],"up":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/13840"}],"wp:attachment":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/media?parent=13890"}],"wp:term":[{"taxonomy":"manual","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/manual?post=13890"},{"taxonomy":"model","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/model?post=13890"},{"taxonomy":"document_type","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/document_type?post=13890"},{"taxonomy":"hidden","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/hidden?post=13890"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Drawing 90726 – Seakeeper<\/span> 4 & 4.5 Bolt-In Details, with a minimum safety
factor of 2.0.<\/p>\n\n\n\n Clearances around Seakeeper<\/span> meet service and operating specifications
and no obstructions are within the Seakeeper<\/span> envelope.<\/p>\n\n\n\n Seakeeper<\/span> 4 & 4.5 Bolt-In Kit is installed (P\/N 90804 – Blind Hole Installation) (P\/N 90805 – Thru-Hole Installation).<\/p>\n\n\n\n Foundation bolts torqued to specification: 155 ft-lbs (210 Nm).<\/p>\n\n\n\n6.2.2 Electrical Checklist<\/h3>\n\n\n\n
Ground Cable<\/strong> (Customer Supplied) ground cable connected on both ends.<\/p>\n\n\n\n 12 VDC Control Power Cable<\/strong> (Seakeeper<\/span> Supplied) <\/p>\n\n\n\n
box or directly to circuit breaker.<\/p>\n\n\n\n
harness (INPUT POWER).<\/p>\n\n\n\n Seawater Pump Input Power Cable<\/strong> (Seakeeper<\/span> Supplied)<\/p>\n\n\n\n
box or directly to circuit breaker.<\/p>\n\n\n\n
harness (SW PUMP VDC IN).<\/p>\n\n\n\n Seawater Pump Output Cable<\/strong> (Seakeeper<\/span> Supplied)<\/p>\n\n\n\n
12 VDC seawater pump.
<\/p>\n\n\n\n Ensure one of the following display options is installed:<\/p>\n\n\n\n
Technical Bulletins)<\/p>\n\n\n\n
<\/p>\n\n\n\n Required GPS signal on NMEA 2000 backbone<\/p>\n\n\n\n Connect NMEA CAN Cable<\/strong> to ConnectBox NMEA port.<\/p>\n\n\n\n Connect NMEA CAN Cable<\/strong> to vessel NMEA backbone.<\/p>\n\n\n\n6.2.3 Cooling Checklist<\/h3>\n\n\n\n
Install 12 VDC seawater pump capable of required flow rates
(Seakeeper<\/span> 4.5 may operate a 24 VDC Seawater Pump).<\/p>\n\n\n\n Route and connect seawater inlet and outlet hoses per 90802 – Seakeeper<\/span> 4 \/ 4.5
Cooling Water Schematic.<\/p>\n\n\n\n Test seawater pump with Seawater Override<\/p>\n\n\n\n Verify coolant level at bottom of filler neck in reservoir.<\/p>\n","protected":false},"excerpt":{"rendered":"