{"id":12591,"date":"2023-02-24T11:50:04","date_gmt":"2023-02-24T11:50:04","guid":{"rendered":"https:\/\/manuals.seakeeper.com\/seakeeper\/seakeeper-35-30hd-operation-manual-90269-7-copy\/maintenance\/scheduled-maintenance-table\/"},"modified":"2023-08-04T15:57:39","modified_gmt":"2023-08-04T15:57:39","slug":"scheduled-maintenance-table","status":"publish","type":"page","link":"https:\/\/manuals.seakeeper.com\/seakeeper\/seakeeper-40-operation-manual-rev-1\/maintenance\/scheduled-maintenance-table\/","title":{"rendered":"5.2  Scheduled Maintenance Table"},"content":{"rendered":"\n<p>This page contains the scheduled maintenance table organized by systems: Mechanical, Hydraulic, Cooling, and Electrical. Perform the Recommended Maintenance after the indicated number of Running [RUN] hours or Years since the last maintenance, whichever occurs first. Scheduled maintenance is not covered under warranty.<\/p>\n\n\n\n<p><span translate=\"no\">Seakeeper<\/span>s are designed for use in a marine environment and to withstand occasional water spray or splash. Prolonged exposure to seawater, however, can cause premature wear and damage to the unit; therefore, it is important to apply a gentle fresh water rinse following exposure to seawater.<\/p>\n\n\n\n<p>The service intervals are based on \u2018average\u2019 use, including operating in various Sea conditions, such as zero or low-speed usage in\/around marinas and anchorages vs. different speeds while underway in light of heavy sea conditions. If the customer\u2019s normal operating conditions include extended SEA operation, more frequent service should be considered, especially Hydraulic Brake and Cooling service.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Certain maintenance should be performed by a <span translate=\"no\"><span translate=\"no\">Seakeeper<\/span><\/span> trained factory technician or trained technician within the <span translate=\"no\"><span translate=\"no\">Seakeeper<\/span><\/span> Dealer network. Find a local Dealer on our website at <a rel=\"noreferrer noopener\" href=\"https:\/\/www.seakeeper.com\/find-us\/\" data-type=\"URL\" data-id=\"https:\/\/www.seakeeper.com\/find-us\/\" target=\"_blank\">www.seakeeper.com\/find-us\/<\/a>.<\/li>\n\n\n\n<li>A <span translate=\"no\"><span translate=\"no\">Seakeeper<\/span><\/span> technician or Dealer is required to perform a brake service and to replace brake bushings or other brake components. This requires a complete flush, bleed, purge and pressurization of the closed hydraulic system.<\/li>\n\n\n\n<li>Scheduled Maintenance and the replacement of \u2018wear\u2019 items are not covered by the www.seakeeper.com\/extended-warranty\/recreation-warranty\/. <\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-table has-medium-font-size\"><table class=\"has-black-color has-text-color\"><thead><tr><th>Interval<\/th><th>System \/ Component<\/th><th>Task<\/th><th>Parts \/ Special Tools<\/th><\/tr><\/thead><tbody><tr><td>Every <br>150 hrs or 3 Months<\/td><td><\/td><td><\/td><td><\/td><\/tr><tr><td><\/td><td>Zinc Anode<\/td><td>Replace zinc anode as needed. Note the wear rate after each check and adjust inspection interval accordingly.<\/td><td>Replacement Zincs are available from <span translate=\"no\">Seakeeper<\/span>.<\/td><\/tr><tr><td>Every<br>1000 hrs or Annually<\/td><td><\/td><td><\/td><td><\/td><\/tr><tr><td><\/td><td>Hydraulic Manifold Components &amp; Fittings<\/td><td>Inspect for leaks<\/td><td><\/td><\/tr><tr><td><\/td><td>Hydraulic <br>Cylinders &amp; Hoses<\/td><td>Inspect for cracks or chafing.<\/td><td><\/td><\/tr><tr><td><\/td><td>Brake Bushings<\/td><td>Inspect \/ Replace if needed<\/td><td><\/td><\/tr><tr><td><\/td><td>Heat Exchanger &amp; Cooing Hoses<\/td><td>Inspect for leakage or deterioration<\/td><td><\/td><\/tr><tr><td><\/td><td>Heat Exchanger<\/td><td>Clean \/ Descale<\/td><td><\/td><\/tr><tr><td><\/td><td>Electrical Connections, Cables, Components<\/td><td>Inspect<\/td><td><\/td><\/tr><tr><td><\/td><td>Mounting Hardware \/ Bolts<\/td><td>Inspect for torque and corrosion free<\/td><td><\/td><\/tr><tr><td><\/td><td>Isolators, clevis assemblies, bushings, pins and clips<\/td><td>Inspect<\/td><td>Foundation isolation bushings<\/td><\/tr><tr><td><\/td><td>Seawater Flow<\/td><td>Confirm<\/td><td>13 &#8211; 15 GPM or <br>49.2 &#8211; 56.8 LPM<\/td><\/tr><tr><td><\/td><td>Hydraulic Oil Pressure*<\/td><td>Confirm<\/td><td><\/td><\/tr><tr><td>Every <br>2000 hrs<\/td><td><\/td><td><\/td><td><\/td><\/tr><tr><td><\/td><td>Glycol Cooling Circuit*<\/td><td>Flush<\/td><td><\/td><\/tr><tr><td><\/td><td>Brake Bushings*<\/td><td>Replace<\/td><td><\/td><\/tr><tr><td><\/td><td>Heat Exchanger*<\/td><td>Replace<\/td><td><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>* These tasks must be performed by a certified <span translate=\"no\">Seakeeper<\/span> Dealer. Find a local dealer at <br>    www\/seakeeper.com\/find-us<\/p>\n","protected":false},"excerpt":{"rendered":"<p>This page contains the scheduled maintenance table organized by systems: Mechanical, Hydraulic, Cooling, and Electrical. Perform the Recommended Maintenance after the indicated number of Running [RUN] hours or Years since the last maintenance, whichever occurs first. Scheduled maintenance is not covered under warranty. Seakeepers are designed for use in a marine environment and to withstand [&hellip;]<\/p>\n","protected":false},"author":9,"featured_media":0,"parent":12585,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"manual":[275],"model":[],"document_type":[],"hidden":[],"class_list":["post-12591","page","type-page","status-publish","hentry","manual-seakeeper-40-operation-manual-rev-1"],"acf":[],"_links":{"self":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/12591","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/comments?post=12591"}],"version-history":[{"count":7,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/12591\/revisions"}],"predecessor-version":[{"id":16638,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/12591\/revisions\/16638"}],"up":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/12585"}],"wp:attachment":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/media?parent=12591"}],"wp:term":[{"taxonomy":"manual","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/manual?post=12591"},{"taxonomy":"model","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/model?post=12591"},{"taxonomy":"document_type","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/document_type?post=12591"},{"taxonomy":"hidden","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/hidden?post=12591"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}