{"id":10050,"date":"2022-03-01T16:34:35","date_gmt":"2022-03-01T16:34:35","guid":{"rendered":"https:\/\/manuals.seakeeper.com\/seakeeper-16-18-installation-manual-90549-2-copy\/1-0-mechanical-installation-2\/saddle-installation\/seakeeper-saddle-preparation\/"},"modified":"2022-03-01T17:13:26","modified_gmt":"2022-03-01T17:13:26","slug":"seakeeper-saddle-preparation","status":"publish","type":"page","link":"https:\/\/manuals.seakeeper.com\/seakeeper\/seakeeper-16-18-installation-manual\/1-0-mechanical-installation-2\/saddle-installation\/seakeeper-saddle-preparation\/","title":{"rendered":"Seakeeper Saddle Preparation"},"content":{"rendered":"\n<ol class=\"wp-block-list\"><li>Ensure that screws fastening saddles to the installation fixture are tight (Figure 6).<\/li><li>Check that each saddle contains 2 plastic screws which will ensure an adhesive gap of .080 in. (2 mm) on top surface of hull as shown in Figure 11. <\/li><\/ol>\n\n\n\n<div class=\"wp-block-image\"><figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/manuals.seakeeper.com\/wp-content\/uploads\/Seakeeper-6-5-Saddle-Cleaning.jpg\" alt=\"\" class=\"wp-image-2655\" width=\"394\" height=\"431\" srcset=\"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-content\/uploads\/Seakeeper-6-5-Saddle-Cleaning.jpg 748w, https:\/\/manuals.seakeeper.com\/seakeeper\/wp-content\/uploads\/Seakeeper-6-5-Saddle-Cleaning-701x768.jpg 701w\" sizes=\"auto, (max-width: 394px) 100vw, 394px\" \/><figcaption><em><strong>Figure 11 \u2013 <\/strong>Saddle Cleaning<\/em><\/figcaption><\/figure><\/div>\n\n\n\n<ol class=\"wp-block-list\" start=\"3\"><li><strong>Thoroughly sand all saddle inside surfaces with 80 grit sandpaper. (IMPORTANT \u2013 BOND STRENGTH MAY BE REDUCED IF THIS STEP IS SKIPPED.)<\/strong><\/li><li>Wipe surfaces clean from dust with alcohol or acetone using new paper towels, not shop rags.<\/li><li>If using Plexus MA590 adhesive, apply Plexus PC-120 surface conditioner to inside surfaces of <span translate=\"no\">Seakeeper<\/span> foundation saddles in accordance with manufacturer instructions. These instructions are located at the end of this section. If using an alternate adhesive, check with manufacturer if any surface conditioner\/etch is required for the aluminum saddles.<\/li><\/ol>\n","protected":false},"excerpt":{"rendered":"<p>Ensure that screws fastening saddles to the installation fixture are tight (Figure 6). Check that each saddle contains 2 plastic screws which will ensure an adhesive gap of .080 in. (2 mm) on top surface of hull as shown in Figure 11. Thoroughly sand all saddle inside surfaces with 80 grit sandpaper. (IMPORTANT \u2013 BOND [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":10036,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"manual":[254],"model":[],"document_type":[],"hidden":[],"class_list":["post-10050","page","type-page","status-publish","hentry","manual-seakeeper-16-18-installation-manual-90549-2"],"acf":[],"_links":{"self":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/10050","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/comments?post=10050"}],"version-history":[{"count":2,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/10050\/revisions"}],"predecessor-version":[{"id":10053,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/10050\/revisions\/10053"}],"up":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/pages\/10036"}],"wp:attachment":[{"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/media?parent=10050"}],"wp:term":[{"taxonomy":"manual","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/manual?post=10050"},{"taxonomy":"model","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/model?post=10050"},{"taxonomy":"document_type","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/document_type?post=10050"},{"taxonomy":"hidden","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/seakeeper\/wp-json\/wp\/v2\/hidden?post=10050"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}