3.1 Electrical Installation Introduction

This section for electrical installation explains how to mount the electrical equipment and how to connect the electrical cables.

Reference Documents & Drawings:

90396 – Seakeeper 6 Cable Block Diagram
90403 – Seakeeper 6 Operation Manual
TB-90191 -Seawater Cooling Pump Recommendations
90558 – ConnectBox Helm Mounting Kit
TB-90640 – ConnectBox Connection Requirements
Seakeeper Compatibility Technical Bulletins
Optional 5″ Touch Display
- 90438 – 5″ Operator Display Envelope and Mounting Details
- 90600 – Seakeeper 5″ Touch Display

12 VDC Power Connector,
16.4 ft (5 m), P/N 20248

M12 D-Code Ethernet Cable
82 ft (25 m), P/N 30355

Y-Branch SW Pump Output & Valve Cable, P/N 20742

NMEA CAN Cable,
19.7 ft (6 m), P/N 30332

DC Seawater Pump Power Out,
16.4 ft (5 m), P/N 20334

DC Seawater Pump Power In,
16.4 ft (5 m), P/N 30327

Figure 30 – Electrical Equipment for Seakeeper 6

Previous

2.5.6 Installation of Seakeeper

Next

3.2 Electrical Equipment Power Connections