Seakeeper 5 / 6 Operation Manual (90403-4) 6/5-222-5365 to 6/5-233-5846
2.3 Display
References
- 90396 – Seakeeper 6 Cable Block Diagram
- TB-90478 – Garmin and Seakeeper Compatibility
- TB-90479 – Raymarine and Seakeeper Compatibility
- TB-90480 – NAVICO and Seakeeper Compatibility
- TB-90598 – Furuno and Seakeeper Compatibility
The display shown below is the user interface to the Seakeeper 6 and should be mounted at the primary helm station if not integrated with a third party Multifunction Display (MFD). It is used to start, operate, monitor and shutdown the Seakeeper. Sensors, alarms and shutdowns are provided to allow unattended operation.
The display provides information in the event of an alarm. Alarms cause precession to stop (Stabilize Off) and the Seakeeper to start coasting down (Seakeeper Off).
