3.1 Electrical Installation Introduction

This section for electrical installation explains how to mount the electrical equipment and how to connect the electrical cables.

Reference Documents:

• 90377 – Seakeeper 3 Cable Block Diagram
• TB-90191 – Seawater Cooling Pump Recommendations
• TB-90575 – DC Installation Kits
• TB-90621 – Seakeeper Battery Sizing Recommendations
• TB-90640 – ConnectBox Connectivity Requirements
• 90558 – ConnectBox Helm Mounting Kit
• Seakeeper Compatibility Technical Bulletins
  
  • TB-90478 – Garmin and Seakeeper Compatibility
  • TB-90479 – Raymarine and Seakeeper Compatibility
  • TB-90480 – NAVICO (Simrad / Lowrance / B&G) and Seakeeper Compatibility
  • TB-90598 – Furuno and Seakeeper Compatibility
• Optional 5″ Touch Display
  
  • 90467 – Second Helm Station 5″ Display
  • 90438 – 5″ Operator Display Envelope and Mounting Details

---

The following images (Figure 12) show the electrical equipment included with the Seakeeper 3 Hardware Scope of Supply (Drawing No. 90388) and are labeled on Seakeeper 3 Cable Block Diagram (Drawing No. 90377):

Figure 12 – Seakeeper 3 Electrical Equipment