Seakeeper 1 Installation Manual (90519-1) 1-202-0001 to 1-233-0630
Seakeeper 1 DC Seawater Pump P/N 30331 (Optional)
- Seakeeper offers a self-priming DC Seawater pump as an optional addition. DC Seawater Pump, Seakeeper 1 Assembly (P/N 30331), is shown in the following figure.
- The Seakeeper Seawater Pump is a 24 VDC pump operated at 12 VDC for the Seakeeper 1 and maintains a seawater flow of approximately 2.5 GPM (9.5 LPM) at 12 VDC.
- The pump assembly is pre-wired for connection to Seakeeper 1 Cable 5 and includes a seawater strainer and various fittings.
The pump specifications are as follows:
| Volts | 24 VDC (operate at 12 V for Seakeeper 1) |
| Rated Flow | 2.5 GPM (9.5 LPM), at 12 VDC |
| Overcurrent Protection Rating | 15 A |
| Ignition Protection | ISO 8846 or equiv. |
