{"id":11056,"date":"2022-07-12T18:27:10","date_gmt":"2022-07-12T18:27:10","guid":{"rendered":"https:\/\/manuals-dev.seakeeper.com\/ride\/qs2-104-1-seakeeper-ride-installation-manual-mechanical-install\/11-mount-wedge-pack\/11-4-mount-wedge-pack\/"},"modified":"2025-09-17T18:27:30","modified_gmt":"2025-09-17T18:27:30","slug":"11-4-mount-wedge-pack","status":"publish","type":"page","link":"https:\/\/manuals.seakeeper.com\/ride\/seakeeper-ride-mechanical-installation-manual\/11-mount-wedge-pack\/11-4-mount-wedge-pack\/","title":{"rendered":"11.4. Mount Wedge Pack"},"content":{"rendered":"\n
\n
\n
\"\"<\/figure>\n<\/div>\n\n\n\n
\n

Note:<\/strong> For concealed cable entry, the Cable Gland Tube must be inserted before mounting the Wedge Pack.<\/p>\n<\/div>\n<\/div>\n\n\n\n

    \n
  1. Apply approved two-part adhesive to both the Transom Plate and transom. Use at least the amount of adhesive listed in the table below to ensure both surfaces are covered completely by adhesive.<\/strong> There must be enough adhesive between the Transom Plate and the transom for a strong bond with no voids. The Transom Plate has three (3) stand offs to allow for adequate adhesive thickness once mounted. Note:<\/strong> Work from this point on should be deliberate, keeping in mind the working time of the adhesive being applied. Warmer temperatures reduce working time.<\/li>\n<\/ol>\n\n\n\n
    \n
    \n
    \"\"<\/figure>\n<\/div>\n\n\n\n
    \n

    Please verify the approved two-part adhesive selected from the list is compatible with your hull material. If in doubt, contact the approved two-part adhesive manufacturer for best practice instructions with your given hull material. Some materials may require a primer for best adhesion. See here 3. Tools Needed \u2013 Seakeeper<\/span><\/span><\/span> Manuals<\/a><\/p>\n<\/div>\n<\/div>\n\n\n

    \n
    \"\"<\/figure>\n<\/div>\n\n\n

    Approved two-part adhesives come in multiple mixing ratios – 1:1, 2:1, or 10:1. Use the correct dispense gun and mixing nozzles for the adhesive type. Failure to do so will result in poor adhesion and will void the systems warranty.<\/p>\n\n\n\n

    <\/p>\n\n\n\n

    Table 3 – Adhesive Quantity<\/p>\n\n\n\n

    Quantity:<\/p>\n\n\n\n

    Controller Size<\/strong><\/td>Minimum Adhesive Quantity <\/strong><\/strong>(per boat)<\/td>Minimum Adhesive Quantity <\/strong><\/strong>(per Controller)<\/td><\/tr>
    450 mm<\/td>900 ml<\/td>450 ml<\/td><\/tr>
    525 mm<\/td>1050 ml<\/td>525 ml<\/td><\/tr>
    600 mm<\/td>1200 ml<\/td>600 ml<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    \n
    \n
    \"\"
    Figure 57 – Adhesive on Wedge Pack and Transom<\/figcaption><\/figure>\n<\/div>\n\n\n\n
    \n
    \"\"<\/figure>\n<\/div>\n<\/div>\n\n\n\n
      \n
    1. Install the Wedge Pack Assembly by sliding the keyholes over the positioning screws. Excess adhesive should appear around the entire perimeter of the Wedge Pack Assembly as the Wedge Pack is pressed into place.<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"

      Note: For concealed cable entry, the Cable Gland Tube must be inserted before mounting the Wedge Pack. Please verify the approved two-part adhesive selected from the list is compatible with your hull material. If in doubt, contact the approved two-part adhesive manufacturer for best practice instructions with your given hull material. Some materials may require […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":11037,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"manual":[264],"model":[],"document_type":[],"hidden":[],"class_list":["post-11056","page","type-page","status-publish","hentry","manual-seakeeper-ride-mechanical-installation-manual"],"acf":[],"_links":{"self":[{"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/pages\/11056","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/comments?post=11056"}],"version-history":[{"count":25,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/pages\/11056\/revisions"}],"predecessor-version":[{"id":16671,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/pages\/11056\/revisions\/16671"}],"up":[{"embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/pages\/11037"}],"wp:attachment":[{"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/media?parent=11056"}],"wp:term":[{"taxonomy":"manual","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/manual?post=11056"},{"taxonomy":"model","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/model?post=11056"},{"taxonomy":"document_type","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/document_type?post=11056"},{"taxonomy":"hidden","embeddable":true,"href":"https:\/\/manuals.seakeeper.com\/ride\/wp-json\/wp\/v2\/hidden?post=11056"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}