4. Tools and Equipment Needed

4.1. Equipment

• Circuit Breaker or Fuse
  • 25 Amp Circuit Breaker or Fuse (Dual Controller Systems including Ride 450, 525, 600 and 750)
  • or 30 Amp Circuit Breaker or Fuse (Quad Controller Systems including Ride 750 Quad)
• 8-Gauge Grounding Wire
• 12-Gauge Power Wire Copper Tinned (Optional)
• Adhesive-Lined Heat Shrink (for power cables)

4.2. Tools

• Drill
• Level
• 1/8 in. Drill Bit
• 1/4 in. Drill Bit
• Phillips Head Screwdriver
• Oscillating Tool or Jig Saw
• Heat Gun
• Crimpers
• Wire Strippers
• Terminals for Cable-to-Battery Connection
• Work Light or Flashlight
• Fish Tape or Electricians Snake

4.3. Boat Features Requirements

• 12 Volt Power Controlled by Battery Isolation Switch/Keyswitch
• GPS with NMEA 2000 Network Backbone
• Seakeeper Compatible MFD
  • Ensure the MFD has the latest version of the Seakeeper software before using the Seakeeper Ride system