2.4 Installation Tools

Use a properly calibrated torque wrench for final tightening of all bolts per this manual. Improper torque application to fasteners may cause damage to the system. Do not use power tools to install the bolts. This can cause galling and does not allow for the correct torque. 

Note: All torque values are in-lbs NOT ft-lbs!

Unless otherwise specified, apply medium strength thread locking sealant to all fasteners prior to installation. Vibra-Tite VC-3 threadlocker is preferred and will be included in the packaging for this purpose.  Because of the dissimilar metals of fasteners and hardware of Seakeeper Ride components specialty coatings are applied to the equipment to prevent corrosion in a marine environment. Avoid removal of these coatings to reduce corrosion.